光纤直放站
光纤直放站专门为解决远离基站且地上布有光纤的区域信号覆盖较弱的问题.
这个系统由近端和远端两部分构成:近端通过直接耦合基站信号,把射频信号转化为光信号放大后,通过光纤传输给远端.
远端再把接收的光信号转化回射频信号,提供到网络覆盖不足的区域.同时,移动信号也可通过放大并经由相反的方向传输到基站.
Items | MU | RU | |
---|---|---|---|
System | 5G/4G/3G/2G | ||
Frequency Range | Uplink (可定制) | 880~915 MHz / 1710~1785 MHz / 1920~1980 MHz / 2500~2570 MHz / 3700~3800 MHz | |
Downlink (可定制) | 925~960 MHz / 1805~1880 MHz / 2110~2170 MHz / 2620~2690 MHz / 3700~3800 MHz | ||
Bandwidth (To Specify Before Production) | 可定制 | ||
Frequency Range | Uplink | 30±2dBm | |
Downlink | 30/.../43±2dBm(可定制) | ||
Maximum Gain | 80/.../95±3dB(可定制) | ||
Gain Adjustment Range | 0~31dB @ Step of 1dB | ||
Gain Flatness | ≤±2dB | ||
ALC(Auto Level Control) | ≤2dB(When The Maximum Output Power of Repeater is Reached, Increase Input Power by 1~20dbm, Output Variation ≤2dB) | ||
Maximum Input Power (Non-Destructive) | 0dBm | ||
Spurious Emission | 9kHz~1GHz: ≤ -36dBm/30kHz | ||
1GHz~12.75GHz:≤-30dBm/30kHz | |||
Standard | Complies with 3GPP and ETSI | ||
Noise Figure | ≤ 6dB | ||
VSWR | ≤ 1.5 | ||
System Delay | ≤ 5μs | ||
I/O Impedance | 50 Ω | ||
RF Connector | N-Type (Female) | ||
Operating Temperature | -25 ~ +55 °C | ||
Relative Humidity Range | ≤ 95% (Non Condensing) | ||
In-Band Ripple | ≤ ±2dB | ||
Power Supply | DC-48V or AC110V/220V, 50/60Hz | ||
Power Consumption | ≤200W | ||
Application | Indoor or Outdoor(IP65) | ||
Dimensions | 428mm×328mm×175mm | ||
Weight | ≤15 kg | ||
Local Control | Web Browser GUI Local Via RJ-45 Interface or WiFi Hotspot | ||
NMS Mode(Optional) | Wireless Modem (3G/4G), IP Connectivity | ||
NMS Function(Optional) | Real-time Alarm for Door Status, Temperature, Power Supply, VSWR, etc; Remote Control Such as Turn On/Off, Increasing/Decreasing Output Power etc; Real-time Status for Output/Input Power, UL/DL Gain, All Status of Repeater etc. |