The iDEN Band ICS BDA (Bi-Directional Amplifier) is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage and communication quality in iDEN ICS BDA system.
Feature:
Aplications:
To expand signal coverage or fill signal blind area where radio network signal is weak or unavailable.
Items | iDEN ICS BDA | |
---|---|---|
Frequency Range (Customized) | Uplink | 380~385 MHz / 415~420 MHz / 806~821 MHz |
Downlink | 390~395 MHz / 425~430 MHz / 851~866 MHz | |
Maximum Output Power (Customized) | Uplink | 30dBm |
Downlink | 30/.../43±2dBm | |
Maximum Gain | 85/.../95±3dB (Customized) | |
Gain Adjustment Range | 1~31 dB @ Step of 1 dB | |
Operating Maximum Gain | ≥Antenna Isolation + 10dB | |
No. of Channels | 8 | |
Power Amplifier Oscillation Protection | Interference Cancellation System | |
Cancellation Feedback Signals – Maximum Sizes of Window | ≥6μSec | |
Interference Cancellation Range | ≥25dB | |
VSWR | ≤1.5 | |
Noise Figure | ≤6dB | |
In-Band Ripple | ≤3dB | |
Maximum Input Power (Non-Destructive) | -10dBm | |
Spurious Emission | ≤-36dBm | |
Third-order Inter-Modulation | ≤-45dBc | |
System Delay | ≤8.0μSec | |
I/O Impedance | 50Ω | |
RF Connector | N-Type (Female) | |
Operation Temperature Range | -25°C ~ + 55°C | |
Relative Humidity Range | ≤95% (Non Condensing) | |
Application | Indoor or Outdoor(IP65) | |
Dimensions | 428mm×328mm×175mm | |
Weight | 15Kg | |
Power Supply (Customized) | AC110V or AC220V, 50/60Hz | |
Local Control | Web Browser GUI Local Via RJ-45 Interface or WiFi Hotspot | |
NMS Mode (Optional) | Wirelss Modem (3G/4G), IP Connectivity | |
NMS Function(Optional) | Real-time Alarm for Door Status, Temperature, Power Supply, VSWR, etc; Remote Control Such as Turn On/Off, Increasing/Decreasing Output Power etc; Real-time Status for Output/Input Power, UL/DL Gain, All Status of BDA etc. |