1. Picture:
2. Specification:
| Items | Donor Unit | Remote Unit | |
|---|---|---|---|
| WCDMA2100 | |||
| Frequency Range | Uplink (Customized) | 1920~1980 MHz | |
| Downlink (Customized) | 2110~2170 MHz | ||
| Maximum Input Power (Non-Destructive) | 10dBm | ||
| Transmission Distance | ≤ 20km | ||
| Maximum Output Power (Customized) | 43dBm | ||
| Maximum Gain | Wireless Access | ≥ 85dB | |
| Cable Access | ≥ 65dB | ||
| Gain Adjustment Range | 0~31dB @ Step of 1dB | ||
| VSWR | ≤ 1.5 | ||
| ACRR | P ≥ 31dBm | (Offset 5MHz) ≥ 33dBc | |
| P ≥ 31dBm | (Offset 10MHz) ≥ 33dBc | ||
| P < 31dBm | (Offset 5MHz) ≥ 20dBc | ||
| P < 31dBm | (Offset 10MHz) ≥ 20dBc | ||
| Noise Figure | ≤ 4dB | ||
| In-Band Ripple | ≤ 3dB | ||
| Peak Code Domain Error(PCDE) | ≤ -35dB | ||
| Out-of-Bank Gain | 2.7 ≤ f_offset < 3.5MHz | ≤ 60dB | |
| 3.5 ≤ f_offset < 7.5MHz | ≤ 45dB | ||
| 7.5 ≤ f_offset < 12.5MHz | ≤ 45dB | ||
| 12.5 ≤ f_offset | ≤ 30dB | ||
| Spurious Emission | Comply with 3GPP TS 25.106 V6.0.0 | ||
| System Delay | ≤ 5μs | ||
| Phase Distortion Across Bandwith | ≤ 6.1°(RMS) & 24.5°(Peak) | ||
| Error Vector Magnitude(EVM) | ≤ 12.5% | ||
| I/O Impedance | 50 Ω | ||
| RF Connector | N-Type (Female) / Changeable / bottom of casing | ||
| Fiber Optic Light Source | Laser unit (wavelength:1310nm/1550nm) | ||
| Optical Receiver Sensitivity | ≤ -25dBm | ||
| Temperature Range | Operation:-25 ~ +55 °C / Storage: -30 ~ +60 °C | ||
| Relative Humidity Range | ≤ 95% (Non Condensing) | ||
| Power Supply(Customized) | DC-48V or AC110V/220V, 50/60Hz | ||
| Application | Indoor(IP32) | Indoor or Outdoor(IP65) | |
| Dimensions | 418mm×90mm×290mm | 428mm×328mm×175mm | |
| Weight | 6 kg | 15 kg | |
| NMS Function(Optional) | Real-time Alarm for Door Status, Temperature, Power Supply, VSWR, etc; Remote Control Such as Turn On/Off, Increasing/Decreasing Output Power etc; Real-time Status for Output/Input Power, UL/DL Gain, All Status of Repeater etc. | ||