...

UHF Fiber Optic BDA


UHF Fiber Optic BDA


UHF Fiber Optic BDA




The UHF Single Band Fiber Optic BDA(Bi-Directional Amplifier) is designed to solve problems of weak radio network signal in the place that is far away from the Base Transceiver Station (BTS) and has fiber optic cable network underground.

The system consists of two parts: Donor Unit and Remote Unit. The Donor unit captures the BS signal via direct coupler closed to BS, then converts it into optic signal and transmits the amplified signal to the Remote Unit via fiber optic cable. The Remote unit will reconvert the optic signal into RF signal and provide the signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and retransmitted to the BS via the opposite direction.


Feature:

  • Aluminum-alloy casing with IP65 protection for high resistance to dust, water and corrosion.
  • Omni-Directional antenna adopted to expand more coverage.
  • Tx/Rx control and alarm messages to be transmitted via one fiber optic cable.
  • Adopting WDM module to realize long-distance transmission.
  • Stable and improved signal transmission quality.
  • One Master Unit supporting up to 4 Remote Units to maximize utilization of fiber optic cable.
  • RJ45 port provides a link to a notebook for local supervision or IP Based NMS (Network Management System) that can remotely supervise BDA’s working status and download operational parameters to the BDA Via Ethernet or LAN.

Aplications:

To expand signal coverage or fill signal blind area where radio network signal is weak or unavailable.

  • Public Safety
  • Transportation
  • Utilities
  • Government
  • Military
  • PAMR
  • Commercial & Industry
  • Oil & Gas
ItemsUHF Fiber Optic BDA
Frequency RangeUplink (Customized)445-447 MHz
Downlink (Customized)435-437 MHz
Maximum Input Power(Non-Destructive)10dBm
System Gain(Cable Access)50±3dB(MU+RU)
Gain Adjustment Range1~31dB@Step of 1dB
MU Extensible Support the RU Quantity8
VSWR≤1.5
Noise Figure@1 RU Connection≤5dB
Spurious Emission≤-36dBm
Third-Order Inter-Modulation≤-45dBc
System Delay≤5 μSec
RF Connector1xN-Female(MU)1xN-Female(RU)
RF Connector8xFC/APC(MU)1xLC/UPC(RU)
iber Optical TFypeSingle Mode
Optical Output Power0±3dBm(1310nm)/-6±3dBm(1550nm)
Optical Receiver Sensitivity≤ - 15dBm
Operation Temperature Range-25°C~+55°C
Power Supply(Customized)AC220V, 50/60Hz
Power Consumption≤50W(MU)≤180W(RU)
ApplicationIndoor(IP32)(MU)Indoor or Outdoor(IP65)(RU)
Dimensions485mm × 90mm × 350mm (MU)428mm × 328mm × 175mm (RU)
Weight6kg (Master Unit)15kg (Remote Unit)
Local ControlWeb Browser GUI Local Via RJ-45 Intefrace or WiFi Hotspot
NMS Mode (Optional)Wirelss Modem (3G/4G), IP Connectivity
NMS Function(Optional)Real-time Alarm for Door Status, Temperature, Power Supply, VSWR, etc; Remote Control Such as Turn On/Off, Increasing/Decreasing Output Power, etc; Real-time Status for Output/Input Power, UL/DL Gain, All Status of BDA etc.